Backhoe Loader HTBL810 with Extendable Excavator Arm

The Hightop HTBL810 backhoe loader combines front-end loading and rear excavation in one machine, providing a practical solution for construction, earthmoving, municipal maintenance, and agricultural projects. With an operating weight of 8,200 kg, a 1.0 m³ front bucket, and a 0.3 m³ rear excavator bucket, it is designed to handle different stages of site preparation without requiring a separate machine for every operation.

One of the HTBL810's distinguishing features is its extendable excavator arm, which provides additional working reach when excavation conditions require it. The product documentation lists maximum digging depths of 4,082/4,500 mm, allowing buyers to evaluate the machine against their project requirements and selected configuration.

Powered by a Cummins 4BT3.9 engine rated at 75 kW, the HTBL810 integrates a hydraulic working system, four-wheel steering, and a multifunctional operating platform. Its combination of digging, loading, material handling, and maneuverability makes it particularly relevant to contractors working across varied job sites.


Product Details

Key Product Features

1. Two Working Functions in One Machine

The front loader and rear excavator allow operators to switch between material loading and excavation tasks using a single equipment platform.

This combination is useful for projects involving trench excavation, backfilling, aggregate movement, and general ground preparation.

2. Extendable Excavator Arm

The extendable rear arm is a key feature of the HTBL810. It provides additional reach compared with the standard arm position and expands the machine's working flexibility.

The digging-depth specification should be checked against the selected machine configuration before purchase.

3. Cummins 75 kW Diesel Engine

The listed Cummins 4BT3.9 engine has a displacement of 4.8 L, a rated power of 75 kW, and a rated speed of 2,200 rpm.

It provides the power source for the machine's integrated loading, excavation, and travel functions.

4. Four-Wheel Steering System

The four-wheel steering arrangement is designed to improve maneuverability when the machine must change direction or reposition within an active work area.

The specified minimum turning radius is 6,581 mm.

5. Hydraulic Working System

The hydraulic system supports the loader and excavator working mechanisms.

The published hydraulic performance data includes:

  • Excavator digging force: 60 kN


  • Dipper digging force: 44 kN

  • Bucket lifting time: 6.8 seconds

  • Bucket lowering time: 3.1 seconds

  • Bucket discharge time: 2.0 seconds

These figures help buyers evaluate the machine's working performance and operating cycle.

6. Multifunctional Attachment Options

The product brochure illustrates a range of additional attachments intended to extend the machine's applications beyond standard bucket operations.

Attachment selection should be based on the intended task, hydraulic requirements, connection compatibility, and actual supply configuration. Buyers are advised to confirm available attachments with Hightop before ordering.

HTBL810 Technical Specifications

General Specifications

ParameterSpecification
ModelHTBL810
Machine TypeBackhoe Loader
Overall Operating Weight8,200 kg
Overall Dimensions (L × W × H)6,700 × 2,700 × 3,500 mm
Wheelbase2,248 mm
Minimum Ground Clearance300 mm
Maximum Travel Speed28 km/h
Maximum Pulling Force65 kN

Front Loader and Rear Excavator

ParameterSpecification
Front Bucket Capacity1.0 m³
Breakout Force58 kN
Rated Loading Lifting Capacity2,500 kg
Bucket Dumping Height2,700 mm
Dumping Distance925 mm
Loader Digging Depth52 mm
Backhoe Bucket Capacity0.3 m³
Maximum Backhoe Digging Depth4,082/4,500 mm
Excavator Swing Angle190°


Engine Specifications

ParameterSpecification
Engine ModelCummins 4BT3.9
Engine TypeInline, Direct-Injection, Four-Stroke
Cylinder Diameter × Stroke4 × 105 × 130 mm
Rated Power75 kW
Rated Speed2,200 rpm
Maximum Torque400 N·m
Displacement4.8 L
Listed Minimum Fuel Consumption≤230 g/kW·h

Transmission and Torque Converter

ParameterSpecification
Torque Converter ModelYJ280
Torque Converter TypeSingle-Stage, Three-Element
Maximum Efficiency84.40%
Inlet Pressure1.3–1.5 MPa
Outlet Pressure0.25–0.3 MPa
Cooling MethodOil-Cooling Pressure Circulation
Gearbox TypeFixed-Shaft Power Transmission
Gears2 Forward / 2 Reverse
Clutch Oil Pressure1,373–1,569 kPa
Maximum Speed28 km/h

Steering, Axle and Tires

ParameterSpecification
Steering Device ModelBZZ5-250
Steering Angle±36°
Minimum Turning Radius6,581 mm
Steering System Pressure12 MPa
Axle ManufacturerFeicheng Axle Factory
Main Transmission TypeDouble Reduction
Final ReducerSingle-Stage Final Reducer
Tire Specification14-17.5 / 19.5L-24
Front Tire Pressure0.55 MPa
Rear Tire Pressure0.223 MPa

Hydraulic Working Performance

ParameterSpecification
Excavator Digging Force60 kN
Dipper Digging Force44 kN
Bucket Lifting Time6.8 s
Bucket Lowering Time3.1 s
Bucket Discharge Time2.0 s

Brake System

The HTBL810 specification sheet lists an external air-over-oil caliper service brake with self-regulating and self-balancing characteristics. Its emergency brake arrangement is described as an operation-power implementing brake and manual operation-power terminating brake.

Buyers should confirm the supplied brake configuration and relevant technical documentation for their destination market.

Backhoe Loader HTBL810 Images

Backhoe Loader HTBL810 Images.jpg

Backhoe Loader HTBL810 Images.jpg

Backhoe Loader HTBL810 Images.jpg

Backhoe Loader HTBL810 Images.jpg

Backhoe Loader HTBL810 Images.jpg

Backhoe Loader HTBL810 Images.jpg

Backhoe Loader HTBL810 Images.jpg

Backhoe Loader HTBL810 Images.jpg

Backhoe Loader HTBL810 Images.jpg

Backhoe Loader HTBL810 Images.jpg

Backhoe Loader HTBL810 Images.jpg

Backhoe Loader HTBL810 Images.jpg

Backhoe Loader HTBL810 Images.jpg

Backhoe Loader HTBL810 Images.jpg


Leave your messages

Related Products

x

Popular products

x
x