PU polyurethane foam spray insulation machine with spay gun High pressure spray foam machine

Main Machine Advantages

1.Air cylinder diameter is 125mm which to ensure the stability of the machine's overall work

2.The machine is equipped with a reflux valve device, in cold areas circulates materials A and B which can preheat the raw materials.

3.The temperature control setting system is very accurate, the maximum error between the actual working temperature and the set working temperature no bigger than 1 degree

4.The machine is equipped with large tires ,easy to move .

5.Secondary pump seals and cylinder seals, all imported from Germany and the United States

1. The overall structure of the gun body is made of high-strength aluminum alloy mold.

2.High-pressure ball valve switch can withstand up to 5000 repeated operation times.

3.All seals on the gun are made in Germany.

Polyurethane Transfer Pump

1. It adopts segmented structure and is very light weight.

2. The seals are all imported from Germany, and the long service life

3. The raw material output is separated from the mechanical transmission part, which is not easy to block and easy to clean.

1.The heating method of spiral winding of road alloy copper belt is fast,uniform heat conduction, stable heating process,sensitive and high-quality temperature sensing equipment.

2.Intelligent temperature control pipeline heating system, regardless of the length of the pipeline, the use process is stable and consistent.

3.The outer layer adopts nylon protective cover to extend the service life of pipeline.

4.The inside of the pipeline adopts special multi-layer resin reinforced pipe with high strength and easy to move. The multi-layer insulation special protective cover can reduce the heat loss of the pipeline and increase the heating efficiency of the pipeline.